I have download DAQmx 8.0 and installed it.
but I can't debug the examples download from the /support web, like "PatternGen_OnBoardLooping_6534". it said that "Cannot open include file: 'nidaqex.h''
I think the reason is maybe the include file and lib has changed.
should I installed the old version of ni-daq or another choice is how can I use the new driver with nidaqmx.h and nidaqmx.lib. I think if I want to use the new version of driver. I should map the data type and function to new version. so, how can I do, and do you have any new example based on the daqmx 8.0 ?
attached is the example
and I have another question is : can Pci-6534 do the following job?
1, Use this card pattern I/o(on board memroy) Loop model to generate wave signal(16bit digital) and still use some additional pins ( other digital bits) as strobe signal as the selection of the three outside devices( each one is 16bit). That is, the 16bit output signal run in TDM(Time Division Multipoexing) model. this three signal will be used as control signal of x,y,z scan.
2, At the same time, use this card to generate a clk and reset signal to sychronize other electronic system.
I have attached a pictrue of Idea.