From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
04-27-2018 12:56 PM - edited 04-27-2018 12:58 PM
Hello fellows.
I just encountered a strange problem with NI-DMM - trying to use it for the first time.
To start: I have PXI-1045 with 16 populated slots and 8306 remote controller.
Installed PXI-4070 in slot 16 - can not run self diagnostics but I can reset the card. Moreover, in MAX I can not read card temperature and calibration dates. NI-DMM gives me an error and can not start completely, please see attached screenshot.
Switching PXI card from slot 16 to slot 15 - same story.
Reinstalled drivers 17.5 to 17.1: same issue - card recognized, but can not run self check and soft panel would not start. This make me thing it's a driver issue.
If anyone encountered the similar issue and found solution - please share you experience.
Thanks,
Sergiy
Solved! Go to Solution.
04-27-2018 01:56 PM
This is an error I'm getting when trying to self test PXI-4070 card. Any Ideas what can cause this?
04-30-2018 10:05 AM
Hi Sergiy,
Can you click on the menu to expand the software tab inside of NI MAX and upload a screenshot of the installed software just to provide more context for your setup? Also are you powering on the PXI chassis before powering on the computer when booting up?
05-17-2018 05:00 PM
Hi Daniel.
So I got another card, this time PXI-4065 and getting the same issues.
PXI chassis was powered before computer, all latest drivers installed etc.
Please see screenshot of my software.
Any clues why it's happening? I have PXI-1045 and DMM card goes in slot 15 if that's important. I have SMU in slot 16 and it works just fine
05-17-2018 06:35 PM
Same code and no Soft front panel start for NI-DMM 15.1, 17.1 and 17.5
Can anyone suggest any solution to get DMM cards to work?
05-18-2018 08:18 AM
Hey Sergiy,
It looks like you have all of the correct drivers installed and the versions installed should work. To clarify, are you still seeing both cards fail the self-test in NI MAX with error 223911 as well? Also, have you tried using different slots in the chassis for these cards?