Digital Multimeters (DMMs) and Precision DC Sources

cancel
Showing results for 
Search instead for 
Did you mean: 

How to design Digital Voltmeter with Transducer input

I want to know the design for voltmeter

 

0 Kudos
Message 1 of 8
(8,586 Views)

@damsellatornado@gmail.com wrote:

I want to know the design for voltmeter


You probably need to provide significantly more detail on what you are looking for.

0 Kudos
Message 2 of 8
(8,578 Views)

And since this board is for questions related to existing DMMs from NI, you are almost certainly posting to the wrong board. If you are asking about designing a DMM, you are probably posting to the wrong forum as well.

0 Kudos
Message 3 of 8
(8,572 Views)

Hey there,

Is there a particular NI DMM design you're curious about?  Here are a few design overviews for our PXI-407x family, and here's a higher level overview of our DMM offerings.  For additional details, let us know what information you're looking for.

-John Sullivan
Problem Solver
0 Kudos
Message 4 of 8
(8,563 Views)

Can you help me how to limit the bandwidth range in DMM

0 Kudos
Message 5 of 8
(7,596 Views)
Your original question implies that you were designing your own dmm. Don't you know your own device?
0 Kudos
Message 6 of 8
(7,577 Views)

Thanks for your reply and i am using NI PXI 5922 scope i am new to this i need to know what are the programming for using scope that like measuring voltage and current frequency Etc.... and to how to set the bandwidth limit in it

0 Kudos
Message 7 of 8
(7,568 Views)
A scope is not a dmm so your question does not belong in this board.

You got some help in your other misplaced post at http://forums.ni.com/t5/Signal-Conditioning/Full-development-system-in-labview/m-p/2902422

Did you install the driver for the scope card? Did you look at the examples? Did you look at the functions on the driver with context help turned on?

Since questions about a scope do not belong in this board, I would recommend you request the moderator to move this thread to the digitizer board. You do this by clicking the Options link.
0 Kudos
Message 8 of 8
(7,560 Views)