Showing results for 
Search instead for 
Did you mean: 

PCI-1422 master clocks and RTSI osc... configurable?

Can i configure the masterclocks (0 and 1) as input or output? Can the RTSI oscillator be input or output?
0 Kudos
Message 1 of 3
The Master Clocks can be configured to generate a master clock signal for cameras. These are outputs and the frequency can range from 500 kHz to 50MHz.

The RTSI bus is simply a bus that allows you to route trigger and timing signals across to synchronize multiple devices. This bus can be either input or output.

Ken Sun
Applications Engineering
National Instruments
0 Kudos
Message 2 of 3
Both master clocks are outputs? According to NI tech support, master clock 1 is generally used as an input to slave the card to a clock generated by a camera. Can master clock 0 be configured this way (as an input)?
0 Kudos
Message 3 of 3