Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

cDAQ 9174 Power and ready light off but active light amber

Solved!
Go to solution

Hello everyone,

I encountered a strange problem, i.e. the Power and Ready light are off but the active light is lit amber. Consequently, the computer cannot detect the device while it could before. 

I don't know what happened before. Could anyone help me? 

Thank you! 

 

0 Kudos
Message 1 of 7
(4,081 Views)

Hi,

Is your device being detected in Windows Device Manager? If it is not, you need to try using another cable. Have you tried unplugging and using other ports?

You can try these troubleshooting steps: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P7OaSAK&l=en-US

These forum posts might be helpful too: https://forums.ni.com/t5/Multifunction-DAQ/NI-cDAQ-9174-Not-recognized/td-p/1107409

https://forums.ni.com/t5/Multifunction-DAQ/cdaq-9174-hard-reset/td-p/3241204

0 Kudos
Message 2 of 7
(4,057 Views)

The device is not detected in Windows Device Manager. I tried different cables that works for another thing, but it didn't work. I also tried another ports, used another computer, which didn't work. The device was also not detected on another computer. However, when I power on the device it seemed a trigger was created so the Device Manager refreshed. Unfortunately, the cDAQ-9174 was not detected. 

It really confused me that the active LED is on amber, but the power LED is off.

I think the most strange thing. If the power is supplied I think the power LED should be lit. But if the power is not supplied the active LED wouldn't have been lit. IMG_2929.jpg

0 Kudos
Message 3 of 7
(4,053 Views)
Solution
Accepted by topic author Hurricane007

Hi Hurricane,

May I know what could have started this problem?

I would like you to check your power supply and driver version. 

You can download the latest version of DAQmx here (please check OS compatibility): http://www.ni.com/zh-cn/support/downloads/drivers/download.ni-daqmx.html

If these steps are still unable to solve the problem, I would suggest you to send your device for repair.

May I know which country you are in so that I can give you the relevant information?

0 Kudos
Message 4 of 7
(4,038 Views)

Thank you for your reply. It is damaged. 

0 Kudos
Message 5 of 7
(4,016 Views)

Hi Hurricane,

Have you sent it for repair?

0 Kudos
Message 6 of 7
(4,010 Views)

Hello Member,

          I also encountered the same problem as you. May I ask why this one is damaged。

0 Kudos
Message 7 of 7
(1,409 Views)