From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
01-26-2012 12:21 PM
01-26-2012 12:24 PM - edited 01-26-2012 12:25 PM
Maybe get an engineering degree? Sorry if it sounds like a harsh reply but the question is extremely vague.
01-26-2012 12:27 PM - edited 01-26-2012 12:28 PM
How about a computer controlled hydroponic hothouse tomato factory?
EDIT: I thought it was silly too Steve, but at least I tried!
01-26-2012 12:38 PM
So you are looking for ideas on what to design and not how to design it? That makes a big difference. If it is the latter then it is actually a good question.
A fun and easy project is a temperature control loop. You can use a 35mm film canister (can you still get those?) with a lightbulb and a thermocouple inside of it. Using a PWM signal to the lightbulb controlled by LabVIEW you can set the temperature inside of the canister.
Is that what you are asking? Sorry if I misunderstood your post.
01-26-2012 12:52 PM
I say we go after a time machine. I bet we could get a DeLoran real cheap and it would not take long to whip up a flux capacitor.
01-26-2012 01:21 PM
@aeastet wrote:
I say we go after a time machine. I bet we could get a DeLoran real cheap and it would not take long to whip up a flux capacitor.
I got the flux capacitor but I'm afraid I don't know where to get a DeLorean.
01-26-2012 02:03 PM
DeLoreans were made in Northern Ireland in the 70s. Once we have a time machine we can go back and get one.
01-26-2012 02:16 PM
@yasmin wrote:
Msc engineering assignment ...i have to design and build a hardware for industrial control application..?
the industry can be aerospace, automotive, manufacturing,medical, domestic..etc
I need an idea pls help..
Ethernet Sniffer.
No hardware required beyond the PC. It will give you a chance to explore acquiring data from the network and formatting it for display. Optionally save the data to file for latter review. It may even give you a chance to spy on the person in the next dorm room and no flux capacitors or time machines required.
Ben
01-26-2012 02:24 PM
And the LabVIEW question here is?
A whack-a-mole machine. A learning experience, and fun, too!
@aestat wrote:
I say we go after a time machine. I bet we could get a DeLoran real cheap and it would not take long to whip up a flux capacitor.
01-26-2012 02:24 PM
Deloreans are available now, flux capacitors ...