Showing results for 
Search instead for 
Did you mean: 

VIPM installation problem

Go to solution

Good afternoon, everyone. My name is Leong, and I have the problem to install the VIPM after I download the VIPM from the website. I installed the NI labview 2009 run time software, the message display as the below:



Error 5 occurred at an unidentified location


Possible reason(s):


LabVIEW: File already open



May I know that what is the problem so I know how to solve it? Thank you for your kindness help.

0 Kudos
Message 1 of 6

Is the error from VIPM installer, or from the LabVIEW Run-Time installer?


If from the VIPM installer, you may have more luck searching the VIPM forums: VIPM forum


Try reading this post from Jim Kring: How come I get error 5 during VIPM installation?

Thoric (CLA, CLED, CTD and LabVIEW Champion)

Message 2 of 6

Dear Thoric. Thank you for your kindness to provide me the solution in order to overcome the problem I faced. I solved the problem according your solution given to me.


Sincerely yours,

Leong Yun Siong

0 Kudos
Message 3 of 6
Accepted by topic author ArduinoProject

You're welcome.

Don't forget there are Kudos and Accepted Solution buttons you can select - these are most appreciated Smiley Happy

Thoric (CLA, CLED, CTD and LabVIEW Champion)

Message 4 of 6

Leong, you should press the "Accept as Solution" button next to Thoric's reply. Also you should press the Kudos button. That means that you like his reply.

LabVIEW 2012

Message 5 of 6

Thank you, Steve. I owe you one.

0 Kudos
Message 6 of 6