System state: IP Stack Configuration Error

[eesen]

I'm getting the message "System state: IP Stack Configuration Error" when I start up with Real-Time Desktop Validator.I read the following

Requirements for a Desktop PC as a Real-Time Target
https://www.ni.com/en/support/documentation/supplemental/08/requirements-for-desktop-pcs-as-phar-lap...

How Can I Test My PC For Compatibility with LabVIEW Real-Time or LabWindows/CVI Real-Time for Desktop ETS?
http://digital.ni.com/public.nsf/allkb/82D66505D86349F38625722C00736AB8?OpenDocument 

Real Time PC target ethernet problem
http://forums.ni.com/ni/board/message?board.id=170&message.id=214322&requireLogin=False 

But I can not find a solution, any suggestion?

I´m using a configuration:
My processor is a Pentium 4,
hard drive is IDE (reformatted to FAT32).
Intel Ethernet 82550 (in the list of supported devices) I disable the extra ethernet chipsets in the bios and only have one available that is compliant with the desktop ETS system requirements.
I connected the PC to our network(which has a DHCP server)

[Elizabeth_S]

Hi eesen,

Which version of LabVIEW are you using?

[eesen]

I solved the problem, thank you.

For people faced with same problem:

I reinstall OS with the USB utility disk  and I reset network settings, it started to work.

[Odryx]

Hello eesen.

I think to have your same trouble.

Could you explain with more details the way to solve the error with IP stack configuration?

Thanks.

Good moorning