Labview dc voltage source

[dpatel28]

Hi, 

I want to put variable dc voltage supply with certain range of voltage and current values. So can someone please help me out in this ? It’s very important for me. 

Thank you.

[RavensFan]

You probably won't get much help.  You haven't provided any real information.

What brand/model of DC voltage supply?

How do you plan to communicate with it?

Have you read the manual?

Searched the manufacturers website or googled to see if any LabVIEW drivers have already been written for it?

[crossrulz]

---

@dpatel28 wrote:

I want to put variable dc voltage supply with certain range of voltage and current values.

---

Have you even picked out a supply?  What voltage and current ranges do you need?  How quickly do you need to update the output?  The information you can give us, the better advice we can give you.  It is extremely rare anybody asks for less information.

[dpatel28]

Hey thanks for replying,

I want to model one test circuit in that I need Vdd supply voltage as user settable from 50 to 100 V. but I also want this voltage supply source also has current limit function as well as like voltage range.

Thank you.

[dpatel28]

hey thanks for replying 

here I am sending you a whole program which I want to execute in labview. please find attached photo below and try to give me help as much you can.

Thank you.12

[RavensFan]

So this isn't some manufacturer's device you are trying to control, but some electronic circuit you are building?  How do you expect LabVIEW to control it?

[dpatel28]

No, I am trying to control hewelett Packard 6030A system power supply device with this specifications. 0-200 V / 0-17 A , 1000 W.

[RavensFan]

That's good.

So what does the schematic you attached mean to us?

What does the manual for the HP tell you about how to control it?

[crossrulz]

---

@dpatel28 wrote:

No, I am trying to control hewelett Packard 6030A system power supply device with this specifications. 0-200 V / 0-17 A , 1000 W.

---

Then start by downloading the LabVIEW drivers for that power supply: Agilent 6XXX Series Power Supply LabVIEW Driver

[dpatel28]

ok, and I also want to control HP 33120A 15 MHz function generator and

TENMA 72-8335A DC power supply device.