Labview 2016 - time error

[Idansh08]

Hi all, i'm new user of labview, and i'm having a problem.

I opened an example project: "NI-USRP Simple Streaming with USRP-2945/2955", and tried to run the FPGA vi.

When the compilation completed an error occurred:

I've found some questions about this exact problem and tried the following things:

-Compile with NI cloud server

-Different directory

-Build and download to FPGA separately

-Change the name of the vi

I own USRP-2955, PCIe-8371,

Windows 7, 64 bit, SP 1

Labview 2016, 32 bit

Thanks!

[wiebe@CARYA]

IIRC, the USP needs a 100MB network adapter. Older laptops might have 10MB. 10 MB could be enough for the bandwidth, but the USRP simply won't connect. A 100MB hub between PC and USP will make it work if that's the problem. Or adding a 100 MB network adapter of course.

This was a while ago. The modern USRP's might even need a 1GB network adapter...

[Idansh08]

Thanks for the answer.

The USRP connected to the computer threw PCIe-8371:

I don't think this is the problem..

[wiebe@CARYA]

Not sure if you already tried these:

https://forums.ni.com/t5/USRP-Software-Radio/an-error-was-detected-in-the-communication-between-the-...

https://forums.ni.com/t5/IF-RIO/NI-5640R-Help-file-Correction-Host-FPGA-Communication-Errors/td-p/38...

http://www.ni.com/pdf/manuals/371621b.pdf page 37

[Idansh08]

Yep, tried all of them.

Maybe there's a chance that some of the SCTLs' clocks in the fpga vi are not correct?

[wiebe@CARYA]

Drawing blanks... Firewall is off?

[Idansh08]

It's off