From 04:00 PM CDT – 08:00 PM CDT (09:00 PM UTC – 01:00 AM UTC) Tuesday, April 16, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 04:00 PM CDT – 08:00 PM CDT (09:00 PM UTC – 01:00 AM UTC) Tuesday, April 16, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
08-05-2011 01:55 AM
I am in need of 3-way switch VI . NOT slider VI . and i have found 3-way switch but i was unable to inc the size of switch and also when i was trying to change the switch position it was showing the 4 position option.
Please help me on this and plz provide me the switch VI
Thankd and regards
Mahadev
08-05-2011 02:11 AM
Use a Picture Ring.
Right click on the control and choose Advanced > customize
Resize the picture box to desired size. and also increase and decrease buttons.
I took 3 way switch from this link http://forums.ni.com/t5/LabVIEW/3-way-vertical-toggle-switch/m-p/205289/highlight/true#M116759
and edited to enlarge the size.
Alter the size of Picture and Increase, decrease button.
08-05-2011 03:17 AM
Hi thanks for the reply ..whenever i used to change the size , infact dec it , boarders are getting erased and i do not want to the select item whenever i click on switch. so plz help me in these issues
08-05-2011 03:29 AM
Hi can i get switch exactly as the design as attached
08-05-2011 03:34 AM
Can you upload the images how the switch should appear during each states?
08-05-2011 03:44 AM
08-05-2011 04:00 AM
I have attached 3-way switch and its states. thanks for the reply ..
08-05-2011 05:44 AM
One problem which i found in the 3-way switch which u shared .. supoose if i press on that switch it goes to up state, agin if press it comes to middle state and again if i press it comes to down state but my requirement is if on up side it should be up state , again if i press it should come to midlle state , now again if press on up , it should to up state not down state ... the same follows for down state also ...
please help me
08-05-2011 05:59 AM
08-05-2011 08:07 AM
I am not gettinbg what u mean .. what is picture ring .. how to change the states.
thanks
mahadev