LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Agilent 34410A voltmeter configure measurement current front/real both enable

Hi all,

I want to measurement 2 channel current by Agilent 34410A,how to configure front/rear enable both.

Just search in forum only have 1 channel, any information would be appreciated.

 

 

0 Kudos
Message 1 of 5
(847 Views)

34410A is a 1-channel DMM, the front/back are the same connections internally routed. You need an external multiplexer to switch the signals to DMM or get another DMM.

 

BTW, all DMMs are 1-channel, some DAQ-like DMMs have a multiplexer/switch matrix card inbuilt to measure multiple signals.

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 2 of 5
(816 Views)

Thank for you reply.

Additional question is when use NI-USB-GPIB Card how to control 34410A from remote to local model. I tried send command as "SYST:LOCAl",doesn't  work and got an error.

 

 

 

 

 

0 Kudos
Message 3 of 5
(712 Views)

Hi Sam,

 


@Sam.Huang wrote:

I tried send command as "SYST:LOCAl",doesn't  work and got an error.


What "doesn't work" and which error did you get?

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
0 Kudos
Message 4 of 5
(707 Views)

34410 LED display "ERROR" still keep remote model .

0 Kudos
Message 5 of 5
(702 Views)