3d graph blank

[Vincent_i-its]

Dear All,

  I have problem with 3D graphs(all controls in the tree.

When I add a new control to it, it only shows the frame, the rest empty. Please find attached image.

I read http://digital.ni.com/public.nsf/allkb/C979CF5A7472F9768625767200579A03, doesn't help as I am not able to able to change video accelerator settings.

My system config is as below:

Processor: i7-950

M/B: Asus P6T SE

RAM: Kingston DDR3 1333Mhz, x12GB

Display card: ATI Mobile Radeon HD6450

OS: Win7x64 Ultimate

Look forward to hearing advise.

Thank you

Regards,

Vincent

[Vincent_i-its]

forgot to attach screenshot.

Please find attached

[Vincent_i-its]

SOS....

Will someone help me on this?

[Ben]

Most graphics related issue in LV are due to .. not LV.

Check for updates for your graphics driver.

If hardware acceleartion is on try backing it down.

Ben

[hanrock]

If you have the Win7 Aero effect on, please try turning it off.

[falkpl]

I have had instances of 3d controls get messed up and found that replacing the control with a new copy to fix some issues.  The 3d graphs are awsome but more buggy than regular labview controls.  This might not be your problem but I have had to do this in the past.

[Vincent_i-its]

Ben, thank you for your advise. I tried to do so, but ATI Catalyst Control Center restricts me from doing that. Please find attached screnshot.

In ATI Catalyst Control Center, there are too many settings and I do not understand what they are all about.I therefore do not dare to change them.

sigh,....

[Vincent_i-its]

Ben, this is the Screenshot

[Vincent_i-its]

Hanrock, Thanks for reply.

I turned it OFF, but still the same

[Vincent_i-its]

Falkpl, thank you for your reply. Am not that lucky though.I tried re-install new copy, still the same.

Maybe I should try new graphic card.

OMG!!!