FIRST Robotics Competition Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

Labview and Imaging roboRIO problems

I'm new at programming this year, so I have very little idea of what to do. My mentor and I have been trying to follow online tutorials, and manuels, but we still can't get it working right. In the screenshot below, it shows how our Labview currently looks, but it's different from all the manuels we've been reading. And our imaging tool will also not connect to the RIO and we don't quite know why.

Any help would be appreciated. Thanks

0 Kudos
Message 1 of 2
(3,944 Views)

It looks like you need to install the Update Suite.  You can find a link to that here: https://decibel.ni.com/content/docs/DOC-34731

After you download that, you'll need to unzip the Suite.  You can do this with a right-click "Extract All"  The password for the Suite is found on the link above.

After unzipping it, run the setup.exe.  This will install the Suite.  Reboot and then open LabVIEW.  At that point, you should see something that looks more like what you're expecting.

0 Kudos
Message 2 of 2
(3,121 Views)