Home Community Discussion Forums Most Active Hardware Boards Real-Time Measurement and Control Topic

Real-Time Measurement and Control

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

SLSC Backplane signals

SLSC Backplane signals

‎09-28-2022 03:27 PM

Hi I recently designed an SLSC-type PCB and one of the boards isn't recognized once I power the chassis.  So I started digging into the backplane signals and discovered a few in there that weren't intuitive as to their function. 

So I found a disconnection between ED_SS# and my CPLD. Could this be the reason the chassis doesn't see my card? What is this signal used for?

Also what is INTIN_N and TRIGIN and TRIG OUT for? Is this documented anywhere?

0 Kudos
Message 1 of 2
(691 Views)
Reply

Re: SLSC Backplane signals

‎09-28-2022 06:21 PM

These documents should give you enough information

https://www.ni.com/docs/en-US/bundle/slsc-mdk-design-specs/resource/375719g.pdf

https://www.ni.com/docs/en-US/bundle/slsc-mdk-rti-design-specs/resource/376860d.pdf

 

santo_13_0-1664407217703.png

santo_13_1-1664407241294.png

santo_13_2-1664407254003.png

 

 

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 2 of 2
(670 Views)
Reply