Network Streams 11/3/21

[Hooovahh]

Attached is the presentation, and the second demo I showed.  The first demo is in the Example Finder.  The rest of the presentation demos and code can be found at VIPM.IO.

https://www.vipm.io/package/hooovahh_network_streams/

I have the video of the presentation, and I'll try to edit it and upload it on youtube at some point.

[sfrosty]

Great Presentation!

I didn't even know there was a "Network Stream"mechanism.

I've always used TCPIP!

• I noticed that embedded cDAQs were part of the presentation and Windows 2020 was mentioned. In "my" experience, LabVIEW version 2020 f1 is the lastest version that supports a cDAQ running Windows embedded 7. Solved: Created Installer indicating Windows 7 or greater required, cDAQ running OS 7 indicates Wind...
• Also mentioned were Shared Variables and latency. Latency has been "my" experience and I, at the time, found the only solution to be: "Never Use Shared Variables"; network or local.

Thanks for taking the time to share. Very much appreciated!

[AllOnAQuest]

Spoiler

Spoiler

Hi Hooovah,

I recently downloaded the packages from your blog for network streams, in order to use Networks Streams to allow my 64 bit LabView to run a few once off 32 bit LabView functions. 

However, when trying to launch example 4 - it didn't load with the package. Is there someplace I can find a similar .zip file with the 4th example from the referenced lecture?

Thanks!

[Bill_in_Detroit]

Install the VIPM package noted and the files you are looking for will then be located at C:\Program Files\National Instruments\LabVIEW 2023\user.lib\_Hooovahh\Network Streams\Examples.

Of course, your version of LabVIEW may vary, so change the path accordingly.