06-13-2012 03:46 AM
Hello, I'm using teststand 4.0. My question is, how can I add my input data in the database. I have a User Interface that sends Input to an instrument and this will send this input to an instrument that is calibrated. Now I do have the data from high and low limits, I have the data that I read out of the calibrated instrument(this seems to be all standard in TS) logging in the database but I can't get it to also log the input data. I do need some instructions how to add additional data in to my database.
thanx, dennis
06-14-2012 04:19 AM
Hello Dennis,
There are alot of different ways to add additional data to your database.
Below you can find several Tutorials/knowledge bases that will help you to do this:
http://digital.ni.com/public.nsf/allkb/F5ADBC61222343B586256CE00055E6D6
http://digital.ni.com/public.nsf/websearch/D30EC9BBA0D740C286256C760049DABD
http://digital.ni.com/public.nsf/allkb/D44A2FC939D893C386256D1A0078D013
http://digital.ni.com/public.nsf/allkb/4A6D56D1EE1CCDEA862570B600015C9D
http://www.ni.com/white-paper/3604/en
These are also the documents I used when I started to work with TestStand.
Also this document might be handy if you want to completely start from scratch:
http://www.ni.com/white-paper/6484/en
07-17-2012 06:08 AM
Thanx.