VI Package Manager Install Xilinx Vivado

[simonbatter]

请问在Package Manager中如何安装Xilinx Vivado编译器，用于在本地编译labview fpga程序？

我找不到对应的package。

谢谢。

[cbutcher]

Depending on your LabVIEW version, you should either use the NI Package Manager, or just directly download the FPGA Module.

You won't find it in the VI Package manager.

Here's a possible link to get you started: https://www.ni.com/en-gb/support/documentation/compatibility/19/compatibility-between-xilinx-compila...

This allows you to select your LabVIEW version and hardware, then it will tell you which link to use for the FPGA module.

The online installers are just ~5MB, and include the option for you to install the Vivado or ISE compilers as desired.

Edit: This link might also be of interest, but it isn't a download link: https://forums.ni.com/t5/LabVIEW/Vivado-2017-2-Compilation-Tools-Direct-Download/td-p/4016094

[pdengrd]

在NI Package Manager首页搜索关键字即可找到:

[simonbatter]

谢谢！ 我在NI Package Manager确实找到了，安装时失败 “服务器过早关闭了连接”如附件failed所示。同时我在设置->源里面看到Vivado的地址为：

https://download.ni.com/support/nipkg/products/ni-v/ni-vivado-2017.2-cg/19.0/release

然后我手动进入这个地址，在support目录下，没有nipkg这个文件夹，如附件source所示。这是不是我安装失败的原因？

[simonbatter]

Thank you cbutcher!

I did found the compilation tool in NI Package Manager and tried to install it, but always got the message "

transfer closed with 1029755 bytes remaining to read".

The package source as stated is on server:

https://download.ni.com/support/nkpkg/products/ni-v/ni-vivado-2017.2-cg/19.0/released

But I can not find the nipkg folder under the support folder.

Is this the reason I got the faild message?

Thank you!

[cbutcher]

Hi simonbatter,

I'm glad you found the download in NIPM, but I'm sorry that I don't know the possible cause of a failed download.

---

@simonbatter wrote:

The package source as stated is on server:

https://download.ni.com/support/nkpkg/products/ni-v/ni-vivado-2017.2-cg/19.0/released

But I can not find the nipkg folder under the support folder.

---

I expect that this directory is probably not available for public browsing. I tried looking on the NI FTP website but didn't see anything promising - you could try if you wanted but I don't think you will find the Xilinx compilers there.

Do you have the FPGA module installed? You might be able to re-run the installation and select the compiler additionally (this will not require time for the reinstallation of FPGA module - it will see you already have it installed - or at least, it does for other components...).

Perhaps pdengrd can give advice about the NIPM failed download?

[pdengrd · Accepted solution]

我也不了解这个错误是什么原因导致的~是不是因为你网络有问题?我这边安装是正常的:

[simonbatter]

我这边可以更新其他package，但都无法成功更新，可能确实是网络问题 。我试着重新用ni fpga自安装程序装一次。

不管怎么样，谢谢你的支持！

[simonbatter]

I installed my fpga module from a standalone *.iso file, not from the NI Package Manager, because it always faild.

May be it is because my unstable network access.

I will try it again.

Thank you cbutcher.

[simonbatter]

确实是我的网络问题，我被政府墙了。我找了个梯子就可以正常安装了。。。。

谢谢你的提醒。