cd 4047 model required

[0333-3083292]

how to add the model of CD4047 IC in multisim 10 or please tell if i can get the component from any site or by you

[Tien_P]

Hi,

There is a generic monostable available in Multisim and you can find it in the Mixed group under the Mixed Virtual Family.  If you are not sure how to hook up this component have a look at the attached file, the  A1 pin is positive edge trigger while A2 is negative, the pulse width is 0.693*RC. I'll be surprise if you are able to find the 4047 model online.

[Sohiiii]

hi

you send the file for CD4047 can not be open...

 plz send the prefix for the file...

[digitalguy]

It opened for me. I have Multisim 10.1

Howard

[kami2k]

Hi, this generic model have only 7 pins, in most of the circuits it is 14 pin, can any body please provide the componet for it

thanks

Kami

[Richard Cruzer]

I'm new with this and I also need help with this model. I just found a CD 4047 model for LTspice, can it be converted to a multisim 10 or 11 model?

[Tien_P]

Hi Richard,

The file you attached is not a SPICE model, it looks like a netlist file and you can't use it to create a component.

[looploop]

i am using multisim 12.0

i want cd4047 

how to get it

it is not included in the library

waiting for your reply

[Tayyab_R]

Hi,

This part is not included in the Multisim database. You will need to see if a spice model has been made for this part by the manufacturer. You can check on the manufacturer's website. If you can find a spice model, you can use the article below to make a custom component in Multisim.

http://www.ni.com/white-paper/3173/en

Hope this helps.

[sameeeer]

please any one can help me to find CD4047 or equivalent IC for inverter circuit