Reading values from input channel in bnc 2110

[Dennis_Knutson]

I hope you are not using the previously discussed method for doing such a long acquisition? That is not at all appropriate, imho. What is your sample rate?

Message Edited by Dennis Knutson on 07-24-2009 03:32 PM

[Nghtcrwlr]

Hi Dennis

Nope i have changed the vi as u mentioned. I entered multiple channels in the single physical channel control. I have chosen 50 samples and 50 000 Samples per second. so the acquisition takes 0.001 sec.

Thanks

[henry Henry]

Hi Dennis,

Sorry to disturb you. Now I have 2 analogue trigger sources and I want to use the BNC-2110 to convert them to digital sources and trigger 2 measurements to start. The thing is I can't use the Analogue Input channel as it only allows one daq assistant to work at one time. And if I sample these 2 sources by one DAQ assistant, the signals are mixed and I don't know how to seperate the 2 signals. Do you know how should I do this?

Thanks very much!

Regards,

Henry