Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple channel daq

Solved!
Go to solution
Hi.. I am using usb 6353 DAQ board for my project. I want to acquire 3 different voltages and display it on labview. When i take data from one channel (ai0) in daq assistant it works fine but when i add channels(ai1, ai2) in the task nd run it, the voltages get mixed up. I have used split subvi to seperate the dynamic data, but the readings are all wrong.
What am i doing wrong?
0 Kudos
Message 1 of 5
(3,801 Views)

What are the signals you are measuring?  Could you supply some code so we can see how you have it set up?  And what exactly do you mean by "all wrong"?


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 2 of 5
(3,791 Views)
I am taking voltage from sensor modules.. And by wrong i mean the data from one sensor is affecting the other.
0 Kudos
Message 3 of 5
(3,789 Views)
Solution
Accepted by topic author Tanya96

So you are seeing ghosting?


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
Message 4 of 5
(3,780 Views)
It worked. Thank you
0 Kudos
Message 5 of 5
(3,744 Views)