Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

How to install parallel Traditional DAQ and DAQ mx in Windows 7

Solved!
Go to solution

Resolved with Traditional NI-DAQ (Legacy) 7.5 for Windows 2000/XP/Vista/7 - BETA and DAQmx Version 9.2.2

 

Adding Traditional Support for an existing System with installed mx drivers.

 

You need both unpacked installation package folders.

 

Install Traditional Driver 7.5 Beta, maybe you need to do this by selecting Compatibility Mode as for a Vista Installation.
Go to your NIDAQmx Installer Directory --> Products NI-DAQ_INF_files --> infInstaller.msi.
Right click --> Uninstall.
Go to your Traditional 7.5 Beta Installer Directory --> Products NI-DAQ_INF_files --> infInstaller.msi
Double click --> Install and proceed with click Next, Next, Finish.

Check in Windows Device Manager if Driver Date is now 9/19/2007
and Driver Version 1.0.0.16384 or similar 1.0.xxx.

Restart your System.

Check in MAX if your Device is shown in MX-Tree and Traditional.

 

This worked for me for a NI DAQ PCI 6025 e card.

I used WES 7 Standard SP1 32bit / x86. I have confimation that it should work on any Windows 7 32bit as well.

Software and System Tester
Message 1 of 10
(5,562 Views)
Solution
Accepted by topic author Thomasw76

Thank you very much!

0 Kudos
Message 2 of 10
(5,312 Views)

Hi Thomasw76,

 

Do you have a solution for Windows 7 64-bit?

The Traditional 7.5 beta throwing the error "This version of Traditional DAQ is supported only in Windows XP/2000/Vista32".

 

Thank you.

 

0 Kudos
Message 3 of 10
(4,673 Views)

As far as I know there is only support for 32bit in 7.5 Beta Traditional.

Maybe 32bit on WOW 64 is a solution but I dont know how to set up this.

This graphic shows the middle column what I mean. maybe this is a help to get to the point of working this issue.

 

Best regards

ThomasNi 64 bit.png

Software and System Tester
0 Kudos
Message 4 of 10
(4,662 Views)

I got it running the same way even under Windows8 embedded 32bit, woohoo!

 

best regards

 

Thomas

Software and System Tester
0 Kudos
Message 5 of 10
(4,657 Views)
How did you do the setup?
0 Kudos
Message 6 of 10
(4,651 Views)

Worked as well with DAQmx 9.7.5.

 

Before I did "Go to your Traditional 7.5 Beta Installer Directory --> Products NI-DAQ_INF_files --> infInstaller.msi" I just deinstalled the Driver of the PCI-Card in Windows Device Manager manually - just to be sure.

 

Everything else as described above.

Message 7 of 10
(4,524 Views)

I need Know what is the drivers for intaller NI DAQ Legacy 7.5 for windows 7 somebody help me ? 

 

best reagards

0 Kudos
Message 8 of 10
(637 Views)

NI did a Release of Tradional Driver 7.5 as Installer for x86 / 32 bit. But it is not available anymore to download. With this Release it was not necessary anymore to do the „.inf“ trick. I have one copy of it in my company repository. I try to share it some how on a web drive.

It works for Windows 7 / Windows 8  and even with Windows 10 32 bit. I use it with Windows 10 IoT Enterprise 2019 32 Bit for our company measurement pc.

 

best regards

Thomas

Software and System Tester
0 Kudos
Message 9 of 10
(623 Views)

I did find a 7.5 Beta, not sure what is in it-

 

http://download.ni.com/#support/daq/pc/ni-daq/traditional/

 

-AK2DM

~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
0 Kudos
Message 10 of 10
(596 Views)