04-28-2021 08:02 AM
Would there be a way to add a 1M input impedance to the USB-6356 device so that an oscilloscope would not have to be connected
04-28-2021 09:42 AM
The best option is to get the charge converter from the sensor manufacturer, if you could not do so, you can try adding the 1M load like below.
04-28-2021 10:03 AM
Thank you, yes I have contacted the manufacturer for a quote on the charge converter, but in the mean time I will give that a shot and see how it goes.
Thanks!
04-28-2021 11:18 AM
I was able to try that solution and it is working just like when connected to the scope, so that will work until I can get a charge converter!
Thanks again!