Dave,
Here's a simple example that uses LV and traditional NI-DAQ to
implement the idea John W. suggested. Note that with the default
values you mentioned for your app, the UI indicators on the front panel
don't update nearly quickly enough to observe operation. To
verify functionality, try values like 0.50 sec pause and a 50 hz pulse
train. Note also that as your ON or OFF time approach 1+ seconds,
you'll need to specify that the "controlling counter" should use the
slower 100 kHz timebase.
-Kevin P.
ALERT! LabVIEW's subscription-only policy came to an end (finally!). Unfortunately, pricing favors the captured and committed over new adopters -- so tread carefully.
