unable to load camera's xml file

[Hatef.fouladi]

if not will will be go to next method to do

[ArtN]

Thanks for the link but unfortunately none of the steps or troubleshooting tips have helped. 

-Art

[Hatef.fouladi]

Ok in this case let recreate camera dirver our self
Do you know about about ni driver wizard?
You can use it to create driver
May be it could solve your problem

[ArtN]

Thanks for the tip. Do you know if NI VISA and its driver wizard supports USB3.0? From previous threads it was unclear.

[Hatef.fouladi]

I was see the help example some years ago for this wizard that was for camera dirver check that It is labview example to use this wizard 
I hope it could help you 

[cjc豆腐]

I also meet this problem so i want to know have you  solve it?

[ArtN]

We were using an xml generation tool and updating an older project for a new camera. We were able to solve our problem by starting the xml project from scratch for the new camera. I don't know why this worked since all the camera attributes are the same between the working and non-working xml files. There were some differences in the syntax of how these attributes were defined which must have been causing problems for the NI software.

Good luck!

[cjc豆腐]

Thank you for your answer .NI tell  me the error is -1074360291(Unable to load camera's XML file). when I use this subvi after  IMAQdx open camera function. I could acquire image.Do you know the reasons ? My English is not very good .Please forgive

[a_clucker]

Hi cjc,

It sounds like you’re now running into a different error beyond what the original poster of this thread did. It might be advantageous to start a new thread on the Machine Vision forum to address this new error.

Kind Regards,

[skynight]

i want to use labview to capture pictures from a camera, but NIMAX cannot recognize the camera's icd file writtn by camera file generator, but the same file can be recognized on the same Ni data acquisition card . i have tried to reinstall the NI MAX, but it still cannot be recognized.