Shape-Based 3D Matching

[Vincent_Claes]

Hi

I was wondering if anyone has some information available(tutorial, example,...) about 3D Vision and Shape based or Surface based matching with a CAD model?

Thanks in advance.

[SarahLF]

Hi there, 

I have found some examples that may help you, please have a look at these.

3D Imaging with LabVIEW 

https://www.ni.com/en/shop/data-acquisition-and-control/add-ons-for-data-acquisition-and-control/wha...

This may be more for general interest, as opposed to information for your specific application, but our customers commonly interface SoftMotion with SolidWorks. Here's some documentation.

NI SoftMotion for SolidWorks - DAQ

https://www.ni.com/en/support/documentation/supplemental/09/ni-softmotion-for-solidworks---faq.html

Also, if you haven't seen these already, there's some forum posts that you may find useful:

https://forums.ni.com/t5/forums/v3_1/forumtopicpage/board-id/170/thread-id/469174/page/1

http://forums.ni.com/t5/LabVIEW/read-an-AutoCAD-drawing-In-Labview-using-ActiveX/m-p/565171

I hope this information is helpful to you. I wish you all the best with your application.

Regards, 

Sarah Flanagan

Applications Engineer 

National Instruments UK

[SarahLF]

Additionally (although from a 3rd party), there is also some information on a 3D-Machine Vision Library for NI LabVIEW at the following page from the AQSENSE website:

http://www.aqsense.com/products/3d-industrial-machine-vision-library.html

Best of Luck, 

Sarah Flanagan

Applications Engineer 

National Instruments UK