problem with MAX after installing LABVIEW 10

[LV_Enthu]

hello everyone, i have a serious problem i installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the second one gave me an two erros 

1.https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019MV8SAM&l=en-US

2. https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000PA3QSAW&l=en-US

i did try the solutions above in the link, but it were all futile. can anyone please suggest me what would be the problem? i had LV8.0 previously on the laptop that is causing the problem. i tried to re-instal the driver disc given 

to me by NI, but no luck. 

when i started the laptop for the 1st time, there was an error in DOS-Prompt saying, DATABASE ERROR and i cancelled the error!!

Also, Labview works fine, its only MAX that is having problems. is there a way i can uninstall only MAX and reinstall it/? please help me..

thanks

[Samuel_S]

CrackJack

Hey I'm sorry to hear about this MAX issue. Here is the link to cleaning a corrupted MAX:  https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P8awSAC&l=en-US

I hope this works for you 🙂

[Edited 4/13/2011 to include correct link]

[LV_Enthu]

Samuel, i could not open that document... 😞

are you talking about this?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P8awSAC&l=en-US

[Samuel_S · Accepted solution]

Sorry CrackJack 

Try this one https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P8awSAC&l=en-US    🙂

[LV_Enthu]

that link solved the problem... thanks!! weird problem thou 😛

[Samuel_S]

No Problem!! yeah it's a weird issue but I'm glad that got you going 🙂

[siya]

i am facing the same problem , and i went thro the link and  followed the procedure. but unfortunately i still hav the same bug.