From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-19-2014 05:00 AM
Hi, am running two seperate Vi's. am new to labview so please help accordingly.
I have introduced a comparison test in one Vi through ashift register. i would like now the second Vi to stop when this comparison condition in the first Vi is met.
I dont want the first Vi to stop, it should only stop the second Vi while awaiting for the next input.
waiting for your help guys
03-19-2014 05:09 AM
Upload your VI
03-19-2014 05:18 AM
03-19-2014 05:18 AM
Hi!
Its hard to tell exactly what you need, since we dont have your code. But in general, you need some kind of synchronisation mechanism. You can for example use, notifiers or ques.
Have a look at the supplied examples that comes with LabVIEW (or check out the produce/consumer template).
best regards
Dan
03-19-2014 06:11 AM
Thanks so much guys. am now starting to pick some ideas. i have attached the Vis as requested for best identification of the help.
waiting help guys
best regards
Alex
03-19-2014 06:19 AM
03-19-2014 06:55 AM
Thanks GerdW,
I would too like to reduce on the property nodes, but this is the program from the manufucturer that comes with the device, am trying my level best to adjust it to fit my needs. so many case structures interlinked with the property nodes. this has been my challange too.
But thanks for your advice
best regards
Alex