ni.com is currently undergoing scheduled maintenance.

Some services may be unavailable at this time. Please contact us for help or try again later.

LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

help

I have 2 different Codes 1 to  move Axes and the other one is to stop all Axes in case of emergency . I want to put them both in one code so I can stop the axes when I want  , any Idea?
 i tried to put the Stop Code in a case and I wire it with a stop buttom , then I put the 2 codes in  While-Loop but it didn't work
 i will be greatfull for any idea or Info , Thank you in advance
the codes are attached to this email
 
Toni
Download All
0 Kudos
Message 1 of 17
(4,661 Views)
Hi Toni,
can you upload your vi with the while loop and your problem in it? Thanks.
Mike
0 Kudos
Message 2 of 17
(4,657 Views)
Hi Mike
 
thanks for your reply . OH I changed a littel bit in my VI so it doesn't match with the last message. i thought maybe it will work in this way
0 Kudos
Message 3 of 17
(4,644 Views)

Hi Toni,

as far as i see it should be work. What doesn´t work?

Mike

0 Kudos
Message 4 of 17
(4,637 Views)

Hi Toni,

is the output of the C844_moving.vi automatically false if you send the stop command from the other loop?

Mike

0 Kudos
Message 5 of 17
(4,635 Views)

Hi Mike

actually if i used the 2 VI seperately, it works, but when I put them in one Vi it doesn't work .

the problem is that when i run the code , the axis start moving and when I tried to push the stop buttom to stop the axis it doesn't work. they still moving till they reach the end position . any idea why?

and yes the C844_moving.vi is automatically

0 Kudos
Message 6 of 17
(4,628 Views)

Hi Toni,

i see no problem with it. I created dummies for the missing vis, so i can run your vi and if i press the stop button the loop ends. Attached is my version.

Mike

Message 7 of 17
(4,626 Views)
hi Mike
 
thank you for everything. i won't bother you again, but i just wanted to tell you that the VI you send and the one i wrote work only one time and when i try another time it don't work no more and gives errors(see attachment)
i will try to find the error
thank's  again for your help
Toni
0 Kudos
Message 8 of 17
(4,616 Views)

Hi Toni,

i think i can´t help you at this point, because i don´t have the send.vi. Is this vi called in a loop? Can you upload more vi´s from your project? Maybe i can then help you.

Mike

0 Kudos
Message 9 of 17
(4,601 Views)
Hi Mike
 
I don't know how to thank you . I upload all the necessarily VIs
Toni
0 Kudos
Message 10 of 17
(4,563 Views)