embedded robotics application

[treeewq]

Hi:

I spent some effort trying to do this

its possible in compact rio

file:///G:/labview%20web%20page%20ref/Create%20an%20Embedded%20State%20Machine%20-%20National%20Instruments.htm

and the on board instruction hint that its possible  sbrio 3692,

but when I go through the implimentation process of trying to place VI in similar places in the robotics mod as they did in the rio tutorial it doesn't happen.

So I tend to come to the conclusion that its not possible unless someone can come up with step by step instructions for labview 2014 robotics.

Any comments?

Thanks for all efforts

[mikeporter]

Having the path to a file on your hard drive doesn't do us much good. What is it that you are trying to do? If you are wanting to build a state machine (as the file title implies) that is just a LV program like any other. You of course need to worry about resource utilization, but there isn't anything fundamentally different.

Mike...

[treeewq]

the embedded application such that when I turn the robotics kit 2.0 power off and back on again or press the reset button the bot will start from the beginning.

Currently, in the robotics module/project the VI will get the bot going but once the power is off the VI will have to run again with the cable attached.

thanks for response.

[nathand]

You need to build a real-time application, set it as the startup application, and deploy it to the sbRIO. There are instructions to do this in the Getting Started with the LabVIEW Robotics Module documenthttp://www.ni.com/pdf/manuals/375286c.pdf (link is to the 2012 version but it's the same for any recent version)