cDAQ-9178 driver specific?

[mcduff]

You have the correct drivers, maybe you have a bad installation.

[rolfk]

It seems almost the same installation but there is one obvious difference, the NI DAQmx ADE Support is 21 in the upper image and 24Q3 in the lower. That’s likely from your attempt to install DAQmx 21 but installing an older version over a newer one should only be possible if you remove the newer one first. That DAQmx installation seems confused and I would attempt to first deinstall at least DAQmx completely and then reinstall it. Possibly you may have to deinstall all NI drivers and do a reinstallation.

[KMC123]

I would rather have everything the same on both machines as much as possible. I have uninstalled everything. The only thing left is the package manager. Is this a good starting point to reinstall?

[santo_13]

---

@KMC123 wrote:

I would rather have everything the same on both machines as much as possible. I have uninstalled everything. The only thing left is the package manager. Is this a good starting point to reinstall?

---

I would rather wipe the machine clean than rely on uninstall-install as there will always be some residue.

[KMC123]

On my package manager it only shows the package manager as installed. Should I look elsewhere?

[KMC123 · Accepted solution]

Reinstalled everything. All is good now! Thanks everyone!