I am using a SCXI 1000 mainframe, SCXI 1200 Aquistion and Control Card, SCXI 1124, and a SCXI 1100.
The instrument information is limited, but this what I gathered from the Campbell program:
Anemomter: A thermistor reading using an AC Half Bridge in the 15mV
slow range with voltage excitation at 10 mV. Also, this instrument
requires a excitation of 2400 mV for 5 sec. to heat the sensor befor
taking another thermistor reading.
Thermal Conductivity: Requires a thermocouple readings at various
intervals (I have this working) during which the sensor is being heated
via a Continous Analog Output of 1600 mV.
That is about all the information I can gather, thank you very much for taking the time to help out.
- Andrew