07-17-2007 12:34 PM
07-17-2007 03:56 PM - last edited on 04-12-2024 03:36 PM by Content Cleaner
Hi Jack,
According with the documentation, the only way to pilot the NI-9474, it is to use the cRIO.
Otherwise, there are the NI-9472 or the NI-9481 that can be used with the NI-USB Carrier (9472 / 9481).
Best regards,
Nick_CH
07-17-2007 05:39 PM - last edited on 04-12-2024 03:37 PM by Content Cleaner
Hello Jack,
With the hardware you currently own, it is not possible to use the 9474 without cRIO. Generally, it is possible to use the c-series module outside of cRIO. As you can see in the DAQmx read me file, the 9474 is supported by the DAQmx driver. As such, you are able to use this module in a Compact DAQ chassis (cDAQ-9172) by programming with DAQmx. The other option that you have is to use an R-series expansion chassis (cRIO-9151). You would need an R-series card in your PXI chassis that would interface with the 9151 chassis that contains your c-series module. I apologize that these do not seem like viable solutions for you, but I wanted you to know that they are options. Thanks,
Mike D.
National Instruments
Applications Engineer
07-17-2007 05:47 PM