RT

[ekanth]

Hi

Iam using PXIe 8135 RT controller.Iam facing a peculiar problem.I am setting

etho primary adapter(static ip)=192.168.3.88

subnet=255.255.255.0

eth1  adapter(static ip)=192.168.6.88

subnet=255.255.255.0

Sometimes after powering on the system eth0 gets disabled and eth1 becomes primary.Screeshot attached.

Regards

ekanth

[raconnel]

I am having a similar issue. I have a number of PXIe-8135 controllers configured with a static IP address on port 1, with port 2 disabled. Every once in a while, after a power outage, the controller restarts with port 2 primary and configured with the static IP address that had been assigned to port 1. How can this be prevented?