Problems creating stoplight

[farcow]

I am currently working on a program to program a stoplight. I have attached a picture of what it is I am trying to program. The problem is I have no idea how to approach this! I have a front panel set up with all of the corresponding lights (Red, yellow, green, left turn arrow) and a switch to indicate if a car is present to turn left. Now im not sure what I should be doing. I feel like I need to use an array for some timing, some shift registers, as well as other things. If someone is able to help clarify an approach let me know!

I use labview 8.5

[Darin.K]

If this is a real project, then remind me not to drive in your town.  If this is homework, then you will need to do a lot better than that.

[NIquist · Accepted solution]

This sounds like one of the old CLD example questions.  There's a huge thread on it here:

http://forums.ni.com/ni/board/message?board.id=170&thread.id=316108&view=by_date_ascending&page=1

There ARE solutions (official and from users) given in that thread though so I would try to work it through by yourself first.

[AnalogKid2DigitalMan]

Rochester Institute of Technology assignment? Just a wild guess....

-AK2DM

[NIquist]

That was too quick!  You didn't try to solve it by yourself first, DID you???   

In that case here are two more.  The car wash and the security system: [links removed; examples no longer available]

http://zone.ni.com/devzone/cda/epd/p/id/1683  

http://zone.ni.com/devzone/cda/epd/p/id/1662  

[farcow]

Haha actually the stoplight example given looks very complicated! I cant follow it at all