cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Ni cDAQ-9172

Solved!
Go to solution
Highlighted

Ni cDAQ-9172

I am running Labview 8.6 on a Windows XP. I have Ni-DAQmx 8.7 installed. When I plug in my Ni cDAQ-9172 device, it is not recognized by my system. I am thinking I might have an old Ni-DAQmx driver (the 8.7). What driver version should I use?

 

Thank you!

0 Kudos
Message 1 of 5
(151 Views)

Re: Ni cDAQ-9172

Which module do you have plugged into the cDAQ-9172?

0 Kudos
Message 2 of 5
(142 Views)

Re: Ni cDAQ-9172

NI 9205 and NI 9211 are the modules.

0 Kudos
Message 3 of 5
(121 Views)

Re: Ni cDAQ-9172

With LabVIEW 8.6 the earliest DAQmx version you can use is 8.7.2 although 8.7.1 supports both of your modules, the download is impossible to find. and the readme for 8.7.2 is MIA

NI-DAQmx 9.0 Works with LabVIEW 8.6 and WinXP as well and has support for TDMS data logging. I would try downloading it from here

0 Kudos
Message 4 of 5
(115 Views)
Solution
Accepted by topic author nsmit106
01-11-2019 11:35 AM

Re: Ni cDAQ-9172

Thank you everyone for your help and suggestions. I still could not get it to work even with downloading extra things. So I started fresh and re-downloaded VirtualBox, Labview, etc. It then worked so I am not sure what I did differently the second time, but it works now.

0 Kudos
Message 5 of 5
(43 Views)