LabView DAQ card programming

[Liamostudent]

I have recently started using an NI USB-6211 DAQ card on my laptop. I have the driver software installed and the DAQ is working, but when in LabVIEW main package, I dont have any functions in measurement tab or express tab to use to control the DAQ . I would appreciate some help 🙂

[RavensFan]

Did you install the DAQ drivers after installing LabVIEW?

[Liamostudent]

yes i have labview with a couple of months but only recieved the daq card recently for a new project

[RavensFan]

I'll ask again.

Did you install the DAQ drivers AFTER installing LabVIEW?

What version of LabVIEW and what version of DAQ drivers did you install?

[Liamostudent]

yes i installed labVIEW before the DAQ drivers, the version of labVIEW i have is 2012. The version of driver is NI-DAQmx 9.1.7. 

[dkfire · Accepted solution]

That version of DAQmx is not supported with LabVIEW 2012.

Try download the newest driver, version 9.7, http://joule.ni.com/nidu/cds/view/p/id/3811/lang/en

[Liamostudent]

yep worked thanks very much!! 🙂