Is it possible to convert a Cluster of 3 elements to dynamic data to use with express vis?

[arron]

I have a waveform graph created from a cluster of 3 elements. Is it possible to convert this to dynamic data to use with express vis.
I have bundled the information for the waveform into a cluster. The source is the cluster of 3 elements the sink is dynamic data.
I am working towards making a FIFO to use in a pretrigger VI. -Thanks

[arron]

Here is a screen shot to help. -Thanks again!

[devchander]

Hi Arron,

Index out each channel's  row /column from the 2D array , bundle the individual graphs, use build array and display as shown in this VI

Hope this helps

Regards

Dev

Message Edited by devchander on 01-20-2006 01:00 AM

[devchander]

Hi Arron,

Oops a small mix up!

Index array of each channel and use 'convert to dynamic data' function

look at attached VI

Regards

Dev

Message Edited by devchander on 01-20-2006 01:13 AM

[binfi]

Hi,

is it possible to convert a Cluster of 3 elements to dynamic data? I have a signal in the time and I have to find the POWER SPECTRA in the frequency. The problem is that first I must fix the step in the x axis for the signal in the time otherwise the x axis (frequency) in the power spectra is wrong.

Alternatively, it's possible later change (inthe power spectra) the values of a signal in the (x) axis of ascissae? Thanks

[Dennis_Knutson]

You can simply use the Build Waveform function.

[crossrulz]

First of all, use the Build Waveform to combine your Y data and a dt.

Secondly, use one of the FFT functions in the Signal Processing->Waveform Measurements palette.  Then there will be no conversions to the dynamic data type.