Interfacing Microchip ICD3 With Labview.

[Ranjeet_Singh]

Here is what I tried. But unfortunately after I press program it takes 23 sec for programming second time.

[Ralok]

The time spend on each call should roughly be the same. Unless there are connection issues etc.

[Ranjeet_Singh]

This is what I want to say. If you have used ICD then first time that also take 30 sec approx. but when user selects program then it take 5 sec to program. how to achecive this here

[Ranjeet_Singh]

If on each program button press, it takes 25 sec then its not the correct way I think, but it should take 5-7 sec at the max as I verified with ICD programmer.

[TonyBleak1]

I know this thread is old but has anyone been able to get MPLABX IPE to work with this?  I have an ICD3 and am trying to program a PIC24FV32KA304.  I keep getting Error code 267.  I have updated the path to point to my ICD3CMD location but I'm just not able to get it to program.  I get Device Not Found.  I can program directly from MPLAB_IPE, just not via Labview.  Any help would be great.

Thanks.

[HDRW]

I need PIC programming with PICKIT3 or PICKIT2 using labview, let me know how to do it

[HDRW]

I've successfully completed projects pickit 2 and pickit 3 with labview interface

you must install mplab x ide v2.2 or later

http://www.microchip.com/forums/m819557.aspx

you have any problem for this i can help you

[HDRW]

I've successfully completed projects pickit 2 and pickit 3 with labview interface

you must install mplab x ide v2.2 or later

http://www.microchip.com/forums/m819557.aspx

you have any problem for this i can help you

[poohmba]

your work can help me to trigger the pickit3 with labview?

[Ram231197]

can you help me ??? I try to connect pickit 2 with pic 16f877a with LabVIEW can I do this (connect pickit 2 with LabVIEW) and How by steps???