Instruments interfacing using labview

[arunamv12]

Hi

Can I interface a micropipette with PC by using LabVIEW DAQ module? That kind of micropipettes (electrically operated) available in the market?

[GerdW]

Hi arunamv,

which "kind of micropipettes" are you talking about? Any specific type/producer. any manual you can link to?

Generic answer to your generic question:

When the interfaces of your pipette and the DAQ device fit you can surely control the device from your PC…

Hint:

Usually you have some hardware with a certain interface (with mechanical, electrical and protocol specifications). Then you select DAQ hardware (or interface connectors/converters), which is able to connect to your hardware (again checking all the required specs).

If you would supply your requirements we could recommend DAQ devices…

[arunamv12]

I need to know about electrically actuated micropipettes or fully automatic micropipette. 

[arunamv12]

micropipette available in net is 1) micropipettes with plunger mechanism and the other is 2) with a chargable battery, digital display with different switches. I need completely automatic, ie electrically operated like on off solenoid valve

[GerdW]

Hi arunamv,

why do you ask in a LabVIEW programming forum?

You should ask those pipette manufacturers! Call them, tell them what you need, ask for quotations!

[arunamv12]

My question is that kind of pipitte is available or not and i want to interface it to pc by using labview..

[GerdW · Accepted solution]

Hi Aruvnam,

you have to ask those manufacturers for availability!

"Interfacing to a PC" should be one point of your requirements list you have to discuss with those manufacturers!