Graph Scale Range

[Avni]

Hello Everyone,

I have a problem in the Waveform Graph.

Basically I have a Waveform Graph and on the graph I have a cursor.

Now I should be able to move the cursor on the Plot , but the condition is that it should not go beyond the X Sacle range.

For e.g. If my X Scale range is 0 to 400, the even if i move my cursor beyond 0 or above 400 the cursor should not scroll or should stop scrolling.

One way of doing is that you keep on checking the X Scale Max and Min Values and as soon as it crosses any one of it, Make the cursor value to 0 or 400.

Is there any other way of doing it?

Please let me know.

Thanks in advance.

Avni

[Dennis_Knutson]

Just right click on the graph and select Advanced. Uncheck 'Cursors Scroll Graph'.

[Avni]

Hi Dennis

Thanks a lot for your reply.

But doing that will not solve my problem.

One e.g. to tell is that If I have a data of 400 points and my scale range is 0 to 100 then if I follow the instructions that you have given, then I will not be able to scroll and see the data beyond 100.

I acquire a data of 400 points. and depending of the Sweep speed, I dispaly the points and scale of the X axis changes .

Meaning If my Sweep speed is 1ms/d then I plot all four hundred points and the scale is 0 to 400

and if my sweep speed is chenged after acquiring the data then my scale changes to 0 to 200 .

I hope that you understand my problem.

Hoping that you will solve my query.

Avni

[Dennis_Knutson]

That's a bit different problem. Whe you first stated it, you said you had 400 point and the scale was set to 0 to 400. If you have acquired 400 points and set the scale to be something less, then you'll probably have to do something like you suggested - monitor the cursor position. Of course, the other option is to make the user use the scroll bar instead of the cursor.