From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-10-2011 02:48 AM
I get an error when i am installing LabVIEW on a System with : WinXP SP3. I tried this by starting the setup. The autorun.exe cannot start (Signature: ErrorEventType : InPageError P1 : c000003c P2 : 00000005 )
I have all the versions (from LV7.0 to LV2009SP1) installed on my Computer.
Can Anybody Help?? (i have already LV2010 on my laptop with Win7. but i need it on my computer also)
A million thanks for any help.
RENN
03-11-2011 02:58 AM
Hi,
You can solve this problem by going to Start » Run and typing: regsvr32 C:Windows\System32\msi.dll . Press OK and your installation should be working.
Cheers,
Philip
03-11-2011 03:18 AM - edited 03-11-2011 03:18 AM
Hi Philip,
Thanks a lot for your reply!
could you please explain me why this happens and why should i register this dll.
Note: after running the command i got another error (Load Library error). dll not found. But its already in System 32.
RENN
03-11-2011 03:29 AM
Do you use a 32bit or a 64bit version of Windows?
03-11-2011 03:56 AM
OS: XP >> Version 5.1.2600 SP3 32 bit
Processor: Athlon 64 X2...
03-15-2011 04:12 AM
Hi,
which regional settings are you using in Windows XP? Have a look at this post: http://forums.ni.com/t5/Multifunction-DAQ/Installation-of-NI-USB-6259-Visual-C-Runtime-Library-Runti...
Can you please report me if you could solve the problem by changing your reginal settings?
Cheers,
Philip