Re : Re: Enter value to numeric control

[gshemer]

Hello,

I control the posotion of a microscope stage by entering a number into a string. In order to send the number to the microscope stage I use a push button connected to a case structure. I would the event to occur (the movement of the stage) when I simply press the enter key.

Thanks in advance,

Gaby   

[MikeS81]

Hi Gaby,

you can use an event structure with a key up or down event. Check the return key and start your process if the event occurs.

Mike

[ajangot]

Hi,

Thanks to post in NI forum,

In properties of your button you have a tab "key navigation",you can assign a touch to toogle (pressed) your button.

See the attachement.

Regards

[gshemer]

Thanks for your reply,

In the key navigation I don't have an otion to set the toggle. I use Labview 8.0

Thank you 

[ajangot]

I have labview 8.0 and I have too the key navigation. Can you send an image of your tab?

Regards

[gshemer]

here is the image of the window I get.

Thanks 

[vt92]

You .jpg looks like the properties for a string control not a boolean.  A boolean (your push button) will have the toggle properties.

Message Edited by vt92 on 01-21-2009 08:08 AM