Different Filters

[gareth1983]

Alright. I added FIRs to different types of filters, as seen in the attached file. The waveform looks pretty weird. Have I done anything wrong, the connection or something???

[kikiduu]

the input to the FIR VI is a waveform but you have wired an array of DBL. Hence the FIR VI is not able to perform filtering correctly. So after the filter VI use a build waveform function and using the input waveform as the "waveform' input and the output of filter VI as the 'Y'. Wire the output to the FIR VI.

[kikiduu]

the input to the FIR VI is a waveform but you have wired an array of DBL. Hence the FIR VI is not able to perform filtering correctly. So after the filter VI use a build waveform function and using the input waveform as the "waveform' input and the output of filter VI as the 'Y'. Wire the output to the FIR VI.

[S.AHMAD]

Hi,

 I modified the VI alredy.The problem is that you cannot to the DBL type  instead of waveform type.See the attached file.

regards.

S.Ahmad

[gareth1983]

Hi S.Ahmad,

I'm using labview 8.5 only and I couldn't open your file. can send again?

[Mathan · Accepted solution]

Here we go.......

[gareth1983]

thanks a lot mathan..