Design 3 value with 1 indicator

[StewKidz]

Hello All,

I have a problem with ic gates program, how these combine it with the value knob on labview program

This program have a 3 value but with 1 indicator,

I want to build,

Knob 1. When the knob value is greater or equal 0>= lamp on, when value greater or equal >=5 lamp off, and when value greater or equal  >= 9 lamp on again,

Knob 2. When the knob value is greater or equal 0>= lamp off, when value greater or equal >=5 lamp on, and when value greater or equal  >= 9 lamp off again,

I waiting your help guys,

im use 2013 labview version

Thank,

Stewkidz

[Artem.SPb · Accepted solution]

Use In Range and Coerce Function or boolean functions

[crossrulz · Accepted solution]

As was said, the In Range And Coerce with another comparison and an OR will get you there.

[PalanivelThiruvenkadam]

---

@StewKidz wrote:

Hello All,

I have a problem with ic gates program, how these combine it with the value knob on labview program

This program have a 3 value but with 1 indicator,

I want to build,

Knob 1. When the knob value is greater or equal 0>= lamp on, when value greater or equal >=5 lamp off, and when value greater or equal  >= 9 lamp on again,

Knob 2. When the knob value is greater or equal 0>= lamp off, when value greater or equal >=5 lamp on, and when value greater or equal  >= 9 lamp off again,

I waiting your help guys,

im use 2013 labview version

Thank,

Stewkidz

---

First set the priority and Use  between three Points

 Use Select switch and Feed Boolean Inputs to decide ON or OFF

[StewKidz]

Mr Artem.SPb and Mr Crossrulz

Thanks you very much for your help,

Before i build it with"formula node"

Now the program is so simply with "In Range and Coerce Function" 

Thank,

Stew kidz

[Veeru_8899]

Go through the attached sloution. it may helps you.....