Dalsa Genie GigE camera using Labview program

[ashish_garg]

Hi All,

I have  a dalsa genie GigE camera which is also visible in NI-MAX and I am able to take images in NI-MAX. but , I want to  grab and save the images using labview program.

I already tried with find example grab.vi file, but it says the network problem either by packet size or by firewall transfer .

I changed packet number to 512 and 1500 and also in my case the firewall transfer is not enabled in the camera attribute so I tried to enable but  even that functionality can't be changed.

Is there any example for it or any suggestion.

Thanks and Regards

Ashish

[P@Anand]

Did you try using the Vision Acquisition Express VI? I believe it would give you a good start to grab images/videos and processing them.

[udka]

-What is the exact error message? Post screenshot of the error message.
-Did you enable the Jumbo Packets?
-Follow the case 3. The camera can be opened in MAX, but it does not acquire images in below troubleshooting guide: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YM6JCAW&l=en-US

[ashish_garg]

Hi Uday,

I am not getting how to change Jumbo Packets in my computer as I am not getting such option in Intel Network/Desktop adapter setting. Can you tell me how to resolve this.

( The error I am getting as NI-IMAQdx (Hex 0xBFF69031), The system cannot acquire images. The packet size is too large or the network setup or firewall may be blocking the network traffic from the camera. )

Looking for some suggestion or help in that regard

Thanks and Regards

Ashish Garg

[udka]

-Can you post equivalent screenshots in this post:https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019Lj9SAE&l=en-US
-What Network Interface Card you have?
-What OS?

[ashish_garg]

Dear Uday,

Network interface card is :  Intel(R) 82567LM-3 Gigabit Network Connection

OS is : Windows 7

Error is : Error 0xBFF69031: The system did not receive a test packet from the camera. The packet size may be too large for the network configuration or a firewall may be enabled. 

I am also attaching the lab view program which I am using to start Dalsa Camera using Labview 

Also do you know, how to trigger the GigE HM1400 Dalsa camera using labview program. 

Thanks and Regards

Ashish