LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Controlling a VFD using Modbus/TCP or Ethernet/IP using LabView?

It looks stretched, but now it is showing.  Play with the width and height that is in the HTML.

0 Kudos
Message 21 of 26
(1,895 Views)

Now?

0 Kudos
Message 22 of 26
(1,892 Views)

Now it's looking good.

0 Kudos
Message 23 of 26
(1,879 Views)
hi please could you tell me how to use rs485 to control VFD i use delta vfd and USB/rs485 it is first time i use labview so i don't know if i have to use visa read/write or serial protocol or modbus master/slave delta provides communication protocol i want to control of speed and monitor torque according to load change
0 Kudos
Message 24 of 26
(1,326 Views)

Hey nagham777!

 

This post is over a year old, for the best chance at visibility, I'd recommend creating a new forum post with more information. I'd also recommend creating it in the Instrument Control forum. Best of luck!

Claire M.
Technical Support
National Instruments
Certified LabVIEW Developer
0 Kudos
Message 25 of 26
(1,308 Views)

@pRoF1T Were you ever able to resolve this issue? I have an identical setup and am running into similar issues. I can see the device on the network, I can log into it via a browser and adjust settings but I cannot establish a connection to it using the ABB Drive Composer application or via LabVIEW. Any pointers much appreciated!

OG
Research Engineer



0 Kudos
Message 26 of 26
(680 Views)