09-30-2014 04:09 PM
Okay so I went back and found some of the old code used to talk to that Tripp Lite UPS. Again this was through the serial interface not as a HID.
Attached is some demo code that I'm not proud of but here it is. It is just a serial request response message with some scaling based on the model of the UPS.
Unofficial Forum Rules and Guidelines
Get going with G! - LabVIEW Wiki.
16 Part Blog on Automotive CAN bus. - Hooovahh - LabVIEW Overlord
09-30-2014 06:02 PM
Thanks a lot!
I'll take a swing at this tomorrow when I get back into work
-Pat
10-01-2014 08:36 AM
Hooovah,
thanks again, this works well with the tripp lite smart500rt1u
-pat