Can not intall Labview for Linux

[DavidLee]

My OS is SUSE enterprise desktop 10.0, the LabVIEW version is 8.0. When installing the version, a message appears as follows:

  ********************************
  * NI-KAL 1.1.0f0 for Linux/x86
  ********************************

******************************** ERROR ****************************************
* Kernel source in /lib/modules/2.6.16.60-0.21-smp/source does not appear to be
* configured for the 2.6.16.60-0.21-smp kernel.
* Configuration of kernel source is required to continue installation.        *
* Refer to the README file for the product you are installing for information *
* about configuring your kernel source.                                       *
******************************** ERROR ****************************************

Installer is aborted.
 

Please advise how to resolve the problem. Thanks.

David

[pine]

It seems that LV80 is not supported on SuSE10.0.

See the following link for more details:

http://digital.ni.com/public.nsf/websearch/35D2B5E483A001A18625716B005BE464?OpenDocument  

帖子被pine在 12-16-2008 12:26 AM

时编辑过了

[Hillman]

Hi David,

Thanks for the post and I hope your well.

Pine has found a good link for you.

It actually says that SUSE 10.0 and LabVIEW 8.0 = √- The software/driver package is not certified to work with this distribution, but may work with an appropriate version of NI-KAL installed or other workarounds. Extensive user testing is recommended before deploying a system using this configuration.

Appropriate version for SUSE 10.0 is NI-KAL 1.4.

You may download various versions of NI-KAL from the NI Drivers and Updates page.NI-KAL Drivers and Updates.

Hope this is a little more detailed,