Again... Graphing Problems...

[dumbest_dummie]

Thanks to everybody that replyed last post!
I agree with you, these sequences are overkill.
But... this was just a simplified simulation. Real software is very sequentially programmed. There is no parallelism at all. One motor running at a time (due hardware restrictions)

task-> check status -> more tasks -> case... & so on...

I don't even know why we are using Labview...
Anyway... nothing has changed this way yet.

This is a more simple question... and it's pointed with red "here!" so you don't get lost.

This "Speed 1 - Copy" graph behaves kinda like it should. Updates every time a mass is moved...
But...
1) I can't initialize it. ? Constant I tryed is also pointed.
2) every parameter should have a different color.
(See Speed 1 - FWD).

Many thanks again...
[]'s

Erick

[eriasystemes]

Ok Erick, give me a little bit of time and I'm gonna show you what I meant earlier by telling you to get things legible.
The problem you have with your copy is that there is only one color because there is a single plot. I'm gonna also try to show what I meant.
The initialisation has to be done in the first sequence of your VI.

Hope this helps ! You won't have to wait for more than 20 hours to have your new VI cooked.

Julien

[eriasystemes]

Hi Erick,
I worked a little bit on your VI in order to show you how to update your XY Graphs in each iteration of a loop.
I made it a bit more legible, but didn't change anything in the way it worked.
I also made a subVI that simulates a new speed, freq and current.
I added differents graphs for Backward and there are really too much of them now...

I hope you'll be happy with this.
Regards,
Julien

[dumbest_dummie]

Hi,

Many many thanks...
Only problem is we have LV 6.1... ain't running!
😞
[]'s

Erick

[eriasystemes]

Here are the ones that work with LV6.1
It should be allright now

Regards,
Julien

[dumbest_dummie]

Oh!

I can't believe the work u had and time u spent with this VI!
Sure u work for NI and your boss obligated u to help me! 🙂
Send me his email so I can tell him good things about u.

Merci...
Je suis vraiment choqué...
(I've been learning french for the last 2 minutes.. with the help of google translator)
Merci...
over and over again.

Erick

[eriasystemes]

I'm happy that my work was what you were trying to do. I hope I didn't change the way your VI worked previously.

I'm currently doing a training period (3 months to go) in Toulouse (France) but if you've got work for me ... 🙂

Regards,
Julien

[dumbest_dummie]

Sorry,
U have no luck at all... you just helped a trainee (wich is the lowest ranked position ever!)
🙂
Anyway, I'm working in Dortmund until end of August ( I come from Brazil). So if u need anything or have any interest in Germany, please send me an email:
brenner@elliptec.com

Best Regards,

Erick

[eriasystemes]

Nevermind, I'll be happy to help you again if you've got more questions.

Regards,
Julien